Permenent Wet Drum Magnetic Separator for Iron Ore

• Type: Magnetic Separator
• Voltage: 380V
• Weight: 1T
• Material: Carbon Steel
• Material Feature: Fire Resistant
• Certification: ISO9001:2008, ISO9001:2000, CE
• Model NO.: CTN
• Energy Saving: Energy Saving
• Warranty: 1 Year
• Color: Customized
• Customized: Customized
• Condition: New
• Transport Package: LCL Wood Case/Iron Case/Iron Frame Case
• Specification: 35-900m³ /h
• Trademark: LONGi
• Origin: China
• HS Code: 84741000
• Production Capacity: 1000sets/Year

Product Description

Permenent Wet Drum Separator for Iron Ore 

The wet separator is used for strong magnetite ore processing. It's mainly used in iron ore separation. It effectively increases Fe content and decreases the silica and other waste.

Product Features

All coating surface must be prepared. All rust, dirt, welding dregs, grease, containments and natural attachments should be cleaned.  All steel row material must be prepared by sand-blasting treatment and blast class should be Sa 2.5.
After the last protective coat finished, make sure that the paint is completely dry.
The trial run should be not less than 6 hours. In normal operation, there should be no abnormal sound. The noise level should less than 85 dB within 1 meter range.
After trial run, tight every bolt and keep the best running status.
The name plate and marks should be tightly connected to main body and should be flat, correct and clear. The protective coat will perform better when the paint fully dried.
High capacity
Heavy Duty
Smart separation
Easy operation
Water saving
Low maintenance cost

Technical Parameters




Application

The wet drum is the key equipment in a concentrate plant. The LONGI not only produces the wet drum, but also arrange it in its best position. Usually, there're several stages of wet separator in one concentration plant. After the final wet separator, the filter will decrease moisture and final concentrate will be produced. Traditional wet separator products contains high percentage of water. Usually its solidity is around 50%. When the feed solidity is less than 55%, the filter is not working well. The wet drum of LONGI brand has special magnetic pole arrangement. Its concentrate has 60-68% of solidity. It largely increase the solidity of concentrate. Usually, higher moisture in concentrate will be punished by buyers. The wet drum from LONGI helps iron ore miners gets more sales price and avoid them to be punished by buyers.

The Customer Site Case





LONGi 's Service Guarantee

One on One Service

LONGi's in house laboratory is well known for providing professional and accurate sample testing for a wide variety of clients in both the mineral and recycling industries. Based on the lab test results and often a necessary site survey our experienced engineers are proud to be able to offer the best solution available every time we can. Not only do we look for the solution to best process the end users material, but, we are mindful to provide the best value and performance in the most economical way.

Valuable Site Service

LONGi is proud to be able to provide experienced mechanical, electrical and magnetic engineers able to assist with most any installation, commissioning or training issues that may arise.

Our main goal is to eliminate any situations before they arise at the work site both before and after the project. LONGi also has strategically located offices within easy access to current and future operating sites to provide spare parts and service and allow for minimal down time.

Ongoing Feedback Service

LONGi is as concerned with not only the equipment we are selling tomorrow, but, with those out in the yield already. With a customer first attitude LONGi makes it a point that past sales are just as important as the future. Because of this LONGi will periodically check in with current users to gather feedback and offer any practical feedback or necessary adjustments that will help obtain the upmost benefit to all our customers.

Certificates



LONGi Laboratory introduction

LONGi Laboratory was established in 2006. It is a comprehensive mineral processing laboratory with magnetic separation gravity separation, flotation and X-ray separation. It is an important part of the magnetic separation engineering technology research center which is approved by CMIF (China Machinery Industry Federation).The laboratory covers an area of more than 4000 square meters, with a complete single magnetic separation testing machines and with a combined in any combination of magnetic separation, gravity separation, and flotation separation testing lines.

The LONGi mineral processing laboratory can conduct mineral processing research experiments, confirmatory experiments and process flow sheet design experiments, analyze the properties of the ore in combination with the experimental data, and provide optional experimental reports, and provide process flow sheet and the basis for equipment model selection.

The LONGi mineral processing Laboratory can provide mineral processing experiments and main mineral elements analysis services for domestic and foreign beneficiation plants and scientific research institutes. It also undertakes the internship tasks of undergraduate and graduate students majoring in mineral processing at China University of Mines, Northeastern University and other universities. It is a test base for high-tech mineral processing equipment and the cradle of technical talents in mineral processing in northern China.


Packing, Storage, and Transportation

Longi has plenty of cases and much experience for delivery of the heavy equipment. Some of the equipment is disassembled into pieces during shipment. The key parts like motor will be fully sealed during transportation.